Make performance
loss visible.
APM-Go! is the first contactless ultrasonic functional control — manufacturer-independent for any cleaning system, delivering reproducible measurements, complete documentation and lasting cleaning quality.
duration
frequency range
deviation threshold
Today, ultrasonic cleaning is invisible.
Generator power tells you nothing about the actual ultrasonic effect inside the bath. Existing methods are operator-dependent, point-wise and disturb the medium — quality control becomes guesswork.
What’s missing today
- No objective, reproducible method to measure ultrasonic effect
inside the bath. - Existing systems (e.g. hydrophones) touch the medium and distort the result.
- Measurements are point-wise —
outliers and drift go undetected. - Operator-dependent procedures yield incomplete,
hardly comparable results.
From gut feeling to measurable value
- Contactless microphone technology captures the acoustic signature without touching the medium
- Reproducible measurement in 30 seconds — manual or fixture-based
- Frequency spectrum and APM value (Pa) enable objective comparison across time, systems and manufacturers
- Complete digital documentation in the Ecoclean App — manufacturer-independent for any system
One measurement. Three outcomes.
APM-Go! pairs contactless sensors with the Ecoclean App. A 30-second measurement delivers visualisation, quality proof and predictive maintenance — manufacturer-independent for any ultrasonic system.
Make performance loss visible
Frequency spectrum and APM value (Pa) reveal directly how the ultrasonic effect is changing — before parts are affected.
Reproducible and documented
Every measurement is traceable — as a digital report with spectrum, APM value and process parameters.
Predictive maintenance
Trend and deviation analyses detect maintenance needs before failures occur — for maximum stability.
In four steps to
a documented
measurement.
APM-Go! works without modifying the system — manufacturer-independent, in open cleaning systems as well as in closed chamber systems, worldwide and in any industry.
Position the sensor
Manually or with suction cup, articulated arm or magnetic mount — without touching the medium.
Start measurement
Through the Ecoclean App via Bluetooth. Microphone captures signals up to 132 kHz.
Receive analysis
Ecoclean App generates reports with frequency spectrum, APM value (Pa) and process parameters.
Monitor trend
Comparison against characterisation measurement — deviations > 20% are flagged as critical.
Versatile.
On every system, every brand.
APM-Go! is manufacturer-independent: whether on your own Ecoclean parts cleaning system or a third-party system — from mobile spot checks to stationary monitoring of industrial parts cleaning lines.
Spontaneous condition checks — anywhere.
At only 412 g, APM-Go! is the mobile diagnostic tool for service technicians. Hand-positioned, measured in 30 seconds, evaluated instantly on the smartphone.
- No system modification required
- Works on any system — manufacturer-independent
- Wireless via Bluetooth
Permanently integrated in chamber systems.
Suction cup, articulated arm and magnet-secure mount allow permanent or repeatable positioning — without contaminating the bath or interrupting the process.
- Reproducible measurement position
- For open and closed chambers
- Fixture-based — operator-independent
Multiple baths, one metric.
Capture the APM value across multiple tanks in a single app. Trend analytics identify the weakest link in the line — before failure.
- Comparison across tanks
- Standardised measurement routine
- Data-driven service intervals
Industrial use, complete data.
On large cleaning lines APM-Go! documents the performance of every single stage — regardless of the manufacturer. Data lands directly in the Ecoclean App and is ready for audits and optimisation.
- Scales to entire lines
- Audit-ready documentation
- Manufacturer-independent — supports third-party systems
Measure, document, compare.
Sensor and app are a pair. Results are stored automatically in a structured report — including spectrum, APM value (Pa), system assignment and trend comparison vs. calibration.
From sensor to decision in under a minute.
01
Add system — manufacturer-independent for every ultrasonic line. All APM features unchanged.
02
Connect sensor via Bluetooth. Measurement starts at the press of a button, takes 30 seconds.
03
Receive analysis — frequency spectrum, APM value (Pa) and process parameters automatically in the report.
04
Check trend — comparison against characterisation measurement. Drift > 20% is flagged as critical.
Four stages,
one platform.
From the entry-level comparison value to full service incl. repairs — choose the plan that matches your maintenance needs. Every new device includes one month of Flat M for instant on-boarding.
Included
Frequency and APM value (Pa) are visible at any time without a Flat subscription — the APM value serves as a comparison metric.
- Frequency & APM value (Pa) always visible
- Comparison metric over time
- Direct visibility of performance changes
Detailed analysis
Comprehensive analysis, graphical reports, automatic trend and deviation analytics.
- Full frequency spectrum
- Trend & deviation analysis
- Graphical reports
- 1 month included with new device
With annual calibration
All Flat M services plus annual calibration for lasting precision.
- All Flat M services
- Annual calibration
- Guaranteed measurement precision
Full service incl. repairs
All Flat L services incl. necessary repairs — maximum operational reliability.
- All Flat L services
- Necessary repairs included
- Maximum operational reliability
- TCO planning certainty
Compact. Robust. Precise.
Industrial-grade microphone with broad frequency range, compact dimensions and low weight — designed for everyday use on any system, manufacturer-independent.
Bring data
into your
cleaning process.
We'll show you APM-Go! directly on your system — regardless of the manufacturer. Schedule an on-site demo or request an online demonstration — our service team responds promptly.